Diploma (Pre-Diploma) project requirements title and Contents



Дата13.09.2016
Размер45.13 Kb.
#9462
DIPLOMA (Pre-Diploma) PROJECT REQUIREMENTS
1. Title and Contents related to Mechanical Engineering (in general).

2. Pre-Diploma Project is done during the VIII semester. The project is included: state of the art on the topic, structure of the Diploma Project and List of References. Volume: 15-20 pages with the title page. The dead line for pre-diploma project is 23.05.2014 ..

Supervisor is chosen by the students.

The Project will be reviewed by the Supervisor and Assoc. prof. G. Hadjikosev.

The students have to give in student’s office 1copy of Pre- Diploma Project Assignment in English (Table 1 ) and in Bulgarian (Table 2 ). The writings table 1, table 2, table 3, table 4, table 5 should not be written when the forms are given to the student’s office.

3. The Diploma assignment (Final variant) (TABLE 3) must be ready one week after dead line for pre-diploma project. That means to 14.06.2014.The diploma assignment must have signatures from the Supervisor, Deputy Dean, Dean and some times Consultant. The official stamp is putted on The Diploma assignment ONLY if the student has marks or other necessary assessment (обходен лист (Table 5) , 2 photos (size: 45mm/35mm) and an envelope with a paper in it on which should be written the address in Turkey, GSM, email)) for all subjects from the curriculum. The students who live in the dormitory should give obhoden list (table 5) when they leave the dormitory (after the defense). Those who are not living in the dormitory should bring the obhoden list before the defense. The obhoden list should be given with all necessary signatures (1.the vice dean-office 4516, 2.supervisor, 3.library, 4. dormitory, 5.the pay office1340) . The diploma project assignment should be filled in 3 forms in using a computer and confirmed by the supervisor, the dean and the vice dean. The forms should be given in office No: 3242, after 3 days you will get back one of them and should add it in covers.



Before printing the tables cancel the writings: table 1, table 2, table 3, table4, table 5.
4. The printed (Font size 14, Margins: Top – 2.5, Left – 2.5, Right – 1.5, Bottom – 2.5, Justify) and bound Diploma Project must contain:

4. 1. Title page (Table 4). and Assignment page(TABLE 3) with signatures and official stamp

4. 2. Volume of the Bound: 40 - 60 pages, minimum 10 figures. Structure of contents must be the same as in the diploma assignment including list of references with more than 10 titles referenced in the text, annexes etc.

5. The Diploma Project has to be presented with at least 10- 30 slides using Power Point within approximate 10 minutes.

6. The Diploma Project complete with the Review (the Supervisor will point who will be the Reviewer) has to be submitted to 20.07.2015 in the office of faculty (room 3242).

7. The dates for presentation will be:

-27.07.2015-31.07.2015

-23.09.2015-29.09.2015

-02.11.2015-07.11.2015

Deadline for Diploma Project: 17.07.2015

DEAR COLLEAGUES FROM BACHELOR PROGRAM OF MECHANICAL ENGINEERING.

 
These are the guidelines for those of you who are going to have Diploma Thesis.
 Diploma defence will begin at the announced time for the days in hall: 3236. The appearance will be according to the list order. A student, who skip his/her turn is going to be replaced by the next on the list.
Defence will go like this:
A. The applicant shall present his/her thesis (NOT THE TOPIC AND CONTENT OF WORK, A THESIS!)
2. Applicant submissions of the thesis DEMONSTRATING thesis - Indicate honors and pages of thesis where he has developed
3. Applicant meets the issues raised in REVIEWS ISSUES AND CRITICAL NOTES

4. Applicant meets the questions from the Commission


Please select the most brief information.!
Common assesment is formed based on quality training, ASSESSMENT Reviewer Commission's assessment. Assessment commission are for work and performance evaluation of the end mark 
Greetings and wishes for success!
 

TABLE 1

TECHNICAL UNIVERSITY OF SOFIA
FACULTY OF MECHANICAL ENGINEERING

Project start date: 16.05.2016 Dean:……………………………
Project finish date: 27.05.2016 Name: Prof. Dr. Eng. M. Vicheva

PRE-DIPLOMA PROJECT ASSIGNMENT

BEng course in Mechanical Engineering

1.Student’s name: Faculty No:

2. Project title:

3. Basic project specifications: ……………………………………………………………….. ……………………………………………………………………………………………………………………………………………………………………………………………………

4.Contents:

a) Introduction

b)State -of-the –Art and trends

c) Basic theory, analysis, synthesis, hardware and/or software development, design, block diagrams, justifications (as applicable!)

d) Equipment

e) Simulations, experiments and analysis

f) Conclusions

g) Others (if applicable): ……………………………………………………………… ……………………………………………………………………………………………………………………………………………………………………………………………………


Project supervisor:……………… Deputy Dean:…………………
Name: Name: Assoc. Assoc. Prof. P. Tomov
Consultant:……………………….
Name:…………………………….


TABLE 2


Декан на МФ

проф. д-р инж. М. Вичева

..............................................


До

Р-ля на катедра

.....................................................

ТУ-София


МОЛБА
От студента..........................................................................................................................................

Факултет: МФ . №.........................., курс........, група..........., спец...................................................

Адрес:....................................................................................................................................................

Телефон:..........................................................e-mail: ..........................................................................

Уважаема г-жо/г-н ръководител на катедра,


Моля да ми разрешите да разработя дипломната си работа в катедра “.....................................................................................................”...................................................................................... с ръководител на дипломната ми работа ......................................................................................................................... ................................................................................................................................................................................................на дипломна тема ...............................................................................................................................................................

................................................................................................................................................................................................................................................................................................................................................................................................

София, ......................2016 г. С уважение:...................................

Съгласен!......................................


.....................................................

/Р-л на дипломна работа/



SOFIA_FACULTY_OF_MECHANICAL_ENGINEERING'>TABLE 3

TECHNICAL UNIVERSITY OF SOFIA
FACULTY OF MECHANICAL ENGINEERING

Project start date: 30.05.2016 Dean:……………………………
Project finish date: 15.07.2016 Name: Prof. Dr. Eng. M. Vicheva

FINAL YEAR PROJECT ASSIGNMENT

BEng course in Mechanical engineering

1. Student’s name: Faculty No:

2. Project title:
3. Basic project specifications:
4. Contents:

a) Introduction

b) State of the art and trends

c) Design of the subject

d) Drawings of the designed subject

e) Justification

f) Conclusions

g) Others (if needed)

Project supervisor:……………… Deputy Dean:…………………

Name: Name: Assoc. Prof. P. Tomov


Consultant:……………………….

Name:


TABLE 4




TECHNICAL UNIVERSITY OF SOFIA



FACULTY OF MECHANICAL ENGINEERING

BACHELOR’S DEGREE OF MECHANICAL ENGINEERING



FINAL YEAR PROJECT:

............................................................


Student: Project supervisor:

...................... ………………….

Fac. No:



SOFIA

July 2016
TABLE 5



Т Е Х Н И Ч Е С К И У Н И­ В Е Р С И ­Т Е Т - С О Ф И Я

МАШИНОСТРОИТЕЛЕН ФАКУЛТЕТ



О Б Х О Д Е Н Л И С Т

Настоящият обходен лист удостоверява, че студента ………………………...................................., с фак. № …………………...............................….., специалност Машиностроене няма задължения към:



  1. Зам.декан: доц. П. Томов ………………………………………………………………….......

  2. Ръководител на дипломна работа: …………………………………………….................................

  3. БИЦ: …………………………………………………………………………………................................

  4. Домакин на общежитие: ………………………………………………………….................................

  5. Каса:..................................................................................................................................................


София, ……………… 2016 г. Подпис на студента: …………………………

Explanation for paragraph 4 (pre-diploma and diploma project assignment)

(for supervisor and student)

4. Contents: depends on subject of the project: design, technology, metrology, economics, engineering logistics, computer integrated manufacturing, modeling and simulation, CNC, CAD/CAM and others. Every project supervisor must draw up final year project ASSIGNMENT till 14.06.2016. In general it may include several divisions: introduction (some words for the subject in general), state of the art and trends (what is done till now, how the real process is looking, how the subject is solved, the trends), design of the subject (design, technology, economics, algorithms, programs etc; including variants, calculation, using CAD), drawings of the designed subject (drawings, models, programs, simulation, experiments, results), justification (preferably economical or others), conclusions, others (if needed).


Сподели с приятели:




©obuch.info 2024
отнасят до администрацията

    Начална страница